THIS WEBSITE IS FOR EDUCATORS and TEACHERS OF TECHNOLOGY.

<b>LAB 2 THUMB DRIVE </b><br>for Mr Circuit Basic Electronics<br> "Ohm's Law & More!" especially for future engineers & technicians
<b>LAB 2 THUMB DRIVE </b><br>for Mr Circuit Basic Electronics<br> "Ohm's Law & More!" especially for future engineers & technicians
<b>LAB 2 THUMB DRIVE </b><br>for Mr Circuit Basic Electronics<br> "Ohm's Law & More!" especially for future engineers & technicians
  • Load image into Gallery viewer, &lt;b&gt;LAB 2 THUMB DRIVE &lt;/b&gt;&lt;br&gt;for Mr Circuit Basic Electronics&lt;br&gt; &quot;Ohm&#39;s Law &amp; More!&quot; especially for future engineers &amp; technicians
  • Load image into Gallery viewer, &lt;b&gt;LAB 2 THUMB DRIVE &lt;/b&gt;&lt;br&gt;for Mr Circuit Basic Electronics&lt;br&gt; &quot;Ohm&#39;s Law &amp; More!&quot; especially for future engineers &amp; technicians
  • Load image into Gallery viewer, &lt;b&gt;LAB 2 THUMB DRIVE &lt;/b&gt;&lt;br&gt;for Mr Circuit Basic Electronics&lt;br&gt; &quot;Ohm&#39;s Law &amp; More!&quot; especially for future engineers &amp; technicians

LAB 2 THUMB DRIVE
for Mr Circuit Basic Electronics
"Ohm's Law & More!" especially for future engineers & technicians

Regular price
$119.00
Sale price
$119.00
Regular price
Sold out
Unit price
per 

When you order this Mr Circuit Basic Electronics Lab 2 Thumb Drive,  #1201-TD, you will receive a thumb drive with all the video lesson presentations, pdf files to print out the Student Progress Sheet, Student Study Guide, Teacher Answer Keys, and Certificate of Electronic Training for your students. It is licensed for one teacher or one classroom.
-----
-------------------------
---------------
Introducing the 

Mr Circuit Basic Electronics Lab 2

There are 5 items for sale here relating to this product.

1. The LAB 2 Box that has the Lab Manual and all the lab parts. (#1201-BOX) 

2. The LAB 2 Manual so you can purchase extras or replacements. (#1201-MAN)

3. The  LAB 2 Parts for experiments so you can buy extra sets (#1201-PARTS)

4. The Lab 2 Thumb Drive with videos, etc. for the teacher to use (#1201-TD)

5. 9-Volt Alkaline batteries (they are not supplied in the lab box) (#9VB)

With this lab, your students will learn electronics technology, and they will have a way of proving that they have. No longer will prospective employers or customers just have to take their word for it.  Upon completion of this lab, you will print out and give them an official signed  8 1/2 x 11" Certificate of Electronics Training that can be added to their resume.  They can display it with pride in their room or office. 

---------------

With this lab, you will work with formulas for Ohm's Law, Watts Law, calculate the equivalent resistance of resistors in series and parallel, use a multimeter to determine the ohms of resistors in series and parallel, calculate resistor wattage, calculate resistor values in LED circuits, calculate and measure current in series and parallel circuits, calculate and measure voltage drops, and more.

You will get practice reading resistor values, current, and voltage on the display of the Digital Multimeter. You will also get more practice using a solderless circuit board to build electronic circuits. (See the whole Skill Set below.). 

This lab was created to meet the needs of  S.T.E.M. --- S.T.E.A.M. --- Automotive --- HVAC --- Avionics --- Electronics --- Robotics etc.

I have trained many technical people and one of their biggest needs was to know how to use and interpret the readings on a multimeter.  This knowledge and experience will open up more opportunities at employment and entrepreneurship.

 

This lab can be used for individual instruction as well as a lock-step classroom program.  Video lessons are available at $119 per teacher or classroom, Part Number #1201-TD. 

For students who miss an instruction period, make-up is very easy. The student can watch the video lesson presentation, study the written lesson, and do the experiment.

This lab is also a perfect activity when you have a Substitute Teacher. 


 There are video lessons on the Thumb Drive #1201-TD

 

Here is the list  of the Lessons in the Mr. Circuit Lab 2

Lesson #1   REVIEW ELECTRONIC COMPONENTS such as the cell, the battery, the LED, and the resistor

Lesson #2   Connect cells in series and draw a schematic diagram of them

Lesson #3   Work with an LED and its schematic symbol

Lesson #4   REVIEW RESISTOR COLOR CODE and how to use it

Lesson #5   Use the Resistor Color Code with +/- 5% resistors

Lesson #6   Use the Resistor Color Code with +/- 1% resistors

Lesson #7   Take inventory of all the lab parts

Lesson #8   PRACTICE DRAWING A SCHEMATIC diagram of a simple circuit

Lesson #9   Compare schematic symbols to their actual components

Lesson #10 Connect components of a simple circuit

Lesson #11 USE A SOLDERLESS CIRCUIT BOARD  to build circuits

Lesson #12 Build a circuit with a resistor, an LED, and a 9-volt battery.

Lesson #13 Compare brightness of an LED with different resistors in the circuit.

Lesson #14 USE OHM’S LAW with voltage, current, and resistance.

Lesson #15 Calculate the equivalent resistance and current through two resistors in series

Lesson #16 Calculate the equivalent resistance and current through two resistors in parallel

Lesson #17 Compare voltage drops across 5 different colors of LEDs

Lesson #18 Calculate the additional resistance needed with various LEDs

Lesson #19 Light multiple LEDs in parallel and calculate the additional resistances needed

Lesson #20 MEASURE RESISTANCE with a variety of Ohm values on a digital multimeter

Lesson #21 MEASURE CURRENT and set up a digital multimeter to measure different amounts of current

Lesson #22 Build a simple LED circuit and measure the current flowing between resistor and LED

Lesson #23 Measure current in the same circuit between the resistor and the battery

Lesson #24 Measure current in the same circuit between the LED and the resistor

Lesson #25 Build a circuit with a 470 ohm resistor, a red LED, 9-V battery, and measure the current

Lesson #26 Build a circuit with a 1000 ohm resistor, a red LED, 9-V battery, and measure the current

Lesson #27 Build a circuit with a 3300 ohm resistor, a red LED, 9-V battery, and measure the current

Lesson #28 Build a circuit with a 6800 ohm resistor, a red LED, 9-V battery, and measure the current

Lesson #29 MEASURE VOLTS and voltage drops across components with a digital multimeter

Lesson #30 Use Watt’s Law to calculate the wattage rating required of a resistor


Here is the SKILLS SET for the Mr Circuit Lab 2

• Identify the physical appearance and schematic of a single cell, a multicell battery, an LED, and a resistor.

• Explain how cells connected in series form a multicell device called a battery and draw the schematic..

• Describe the schematic symbol for an LED, show the polarity with Anode and Cathode.

• Describe the purpose of the ‘flat side’ and the ‘short lead’ on the LED in reference to the Cathode..

• Understand that the long leg of the LED is the  positive side or the Anode.

• Understand that the beveled edge on an LED is the way to find the Cathode if the LED is in a wired circuit.

• Understand how to use the Resistor Color Code to identify resistor values for both 5% and 1% resistors.

• Take inventory of electronic components and report any discrepancies.

• Draw a simple circuit schematic with symbols and label them including their for polarity.

• Build a basic circuit using the solderless circuit board, the LED, various resistors and a 9-volt battery. 

• Match the physical component to their schematic symbol.

• Construct a circuit using a schematic diagram.

• Understand the construction of a solderless circuit board.

• Use Ohm’s Law to calculate voltage, current, and resistance.

• Calculate the equivalent resistance of two resistors in series.

• Calculate the equivalent resistance of two resistors in parallel.

• Identify various voltage drops across different colored LEDs.

• Calculate the additional resistance needed in an LED circuit based on voltage of the power source.

• Connect multiple LEDs in a parallel circuit.

• Measure a variety of values of ohms with a digital multimeter.

• Interpret the reading on the multimeter display in the Ohms function.

• Set up a multimeter to check the current flowing in a circuit.

• Connect the multimeter to a circuit and measure the current.

• Break a series circuit and connect the multimeter to measure the current.

• Explain that the current flowing in a series circuit is the same amount through each component.

• Explain the effect of the amount of current flowing in an LED circuit on the brightness of the LED.

• Set up a multimeter to measure DC voltages.

• Measure DC voltage and voltage drops across components in an active circuit.

• Calculate the minimum wattage needed in a resistor.

    We accept Credit / Debit Cards or Public School Purchase Orders.
    Thank you from G. Art Gibson, author and educator
    Mr Circuit Technology  805-316-1163

    We ship orders the same business day we receive it.

      We accept Credit / Debit Cards or Public School Purchase Orders.
      Thank you from G. Art Gibson, author and educator
      Mr Circuit Technology  805-316-1163

      We ship orders the same business day we receive it.